My Creative Space

I’m still really busy at work hence the slow posting. There are no projects on my creative space at the moment but I did finish this project at the weekend.



Some colleagues approached me with a project – they wanted me to use fabric from a dress from Africa to make a big, huge tie for another colleague who was leaving the team. I used the Father’s Day Tie tutorial on Purl Bee’s blog

The dress had a circle skirt which was pieced from several pieces so it was hard to find enough fabric on the bias to cut the tie from. The pieces of the tie was cut directly from a length of the skirt – hence there were stitch-lines right across the front! I used some light-weight polyester fabric from my stash to line the back.



It was a fun project and my colleagues loved it!

See other creative spaces here.

Have a creative day, friends.

'Guess the project' mini-competition

I’ve just finished this little sewing project for my cousin and I thought it might be funny to make this into a little competition. I’ll throw in a surprise prize for the winner – but more about that later.

So –here they are.



What do you think they might be? Are they perhaps very small hats for children?



Are they face-masks for children? Or a curious gadget for blowing your nose into?



Maybe they are small dunce caps for dolls (sorry Fireman Sam but you were the closest to hand)?



Or perhaps they are a burlesque related item for grown-ups??



Send me your guesses as comments to this post – you can guess more than once. All the names of people who get the correct answers will be put into a hat on Sunday 26 September and a winner drawn from the hat. I’ll send the winner a surprise prize (handmade by my fair hands) in the post. Please make sure you include your email address so I can email you for your snail mail address if you’re the winner. For privacy, do not include your postal address with your answer – just your email address.

Good luck guessing and have a great week ahead!

A wee change (plus update)

This morning the blog was looking very weird with a bizzare mosaic of error icons all over the place. So I've swapped over to a simpler, more basic design for a little while whilst I figure out what's gone wrong. It doesn't look as pretty as before but at least it's readable.

I'm working on a couple of fun projects which I hope to share with you soon.
Have a great weekend, friends.

**UPDATE : All fixed and back to normal now!**

My Creative Space

Things are heating up at work. I work in a local University and we’re preparing for the annual enrolment of new students. This is the point we have been working towards all year. For me and my team, that means enrolling about 650 students in the space of 6 hours. **bites nails and crawls under desk wailing** Enrolment is 3 weeks away and I am feeling rather stressed out and ill-prepared for the onslaught that is to come. To make things slightly more interesting, we’re waiting for the builders to finish our new office so we can move in and get it ready in time for the start of term. The move is in 2 weeks and the place is a mess with rubble everywhere, dust, walls half-built, wiring and electrics not in .... hmmmmmm, that space under the desk sure looks inviting right now. What’s that song by Green Day which sums up how I feel – oh yeah, it’s “Wake me up when September ends”.

I‘ve been trying to stay sane and keep the stress at bay by trying to squeeze in at least half an hour of sewing a night. It calms my mind and lets me wind down enough to get a reasonable night sleep.

My space right now is taken up by these two foldaway shopping bags.



The darker fabric is actually a dark brown although it looks black in the photo. I thought a contrasting red bias-binding might work very well with this fabric. What do you think?

The other fabric doesn’t photograph so well – it’s a slightly darker green than in the photo above. The only bias-binding I had in my stash that goes with it was this green one.

They are both at a stage where I am ready to start attaching the bias-binding. I’ll post about the finished bags next week.

See other creative spaces here.

Have a creative day, friends.

Wordless Wednesday – I know how you feel, Homer

The Noodlehead Gathered Clutch

I saw Noodlehead’s Gathered Clutch pattern ages ago and have been meaning to give it a try. I finally got around to it last week and here are my two gathered clutches.

I made them from fabric I had leftover from my zipaway tote projects.
One side features the gathered fabric and the contrasting band. The other side is plain.





They are rather lovely, don’t you think?
Thanks for the tutorial, Anna!

The fold-away shopping bag tutorial

I love fabric shopping bags and I love using them when I’m out grocery shopping. Here’s my tutorial for an eco-friendly shopping bag which folds away neatly into a cute pouch when not used. Sorry it’s a bit long – and pic-heavy. At the end, you should have something which looks like this:



And folds into this ...



**UPDATE : You can now download this tutorial as a PDF.

You’ll need the following:
• Some sturdy fabric - I used half a metre of 55" (142cm) wide home-decorating weight fabric.
• Some poppers (you’ll need one female half of the popper and two male halves of the popper) – I used sew-in ones but you can use no-sew ones and set them with a popper setting tool
• A fancy button or you can make a yoyo or a small fabric flower (optional)
• 92 inches (234 cm) in total of bias-binding (I used a double-fold one which is 3/4(three quarter) inch (20mm). When folded around my project, it’s 3/8(three eighth) of an inch or 10mm – NOTE: If you want to bias-bind the inside bottom seam of your bag, you will have to allow for an extra 10 inches.

You’ll also need some tracing paper or greaseproof paper to draft out your pattern. I will try to get a pdf of the actual pattern done sometime soon but it is pretty easy to draft.

P.S. I apologise if you’re not used to working in inches. I am a bit of an old-school girl and usually only work in inches.

Here’s the flap. See drawing below. You’ll need to draw a rectangle measuring 6.25 inches by 5 inches. At the bottom of the rectangle on one side, mark a point 2 inches in from the side and mark another point 2 inches up from the bottom. Repeat for the other corner of the rectangle. Then using a curved object like a jar lid or egg cup, draw a curve from one point to the other. You’ll end up with a pattern like the one drawn in pink. This pattern includes a 3/8 (three eighth) inch (1cm) seam allowance.



OK, here is the body of the bag. See drawing below. Draw a rectangle measuring 24 inches by 10 inches. Draw a line across the rectangle 8 inches down the long side. Let’s concentrate on the smaller rectangle section now and draw our bag handle. Along the 10 inch sides, make a mark 4 inches in and a second mark 3 inches after that. Join the marks so your smaller rectangle is split into 3 even smaller rectangles. The 3 inch section in the middle is your bag handle. Make little marks 2 inches from the bottom of your handle section on both sides. Make two other little marks 2 inches away from the handle section along the 10 inch line. Join the marks on each side using your jar lid or egg cup. You should now have a pattern which looks like the one marked below in green. Referring to the drawing below, mark the side which should be placed along the fold of your fabric. This pattern includes a 1/2 (half) inch seam allowance (1.27cm).



Using the bag body pattern which you drafted, place it on the fold of your fabric and pin in place. Cut out your fabric. Repeat this process again so you end up with 2 body pieces. Save the U shaped piece you cut out at the top where the handle is. You can cut the flaps out of these U shaped offcuts.



Placing your pieces right side together, pin the sides of the bag.



Sew along the sides of your bag like this using a 1/2 (half) inch seam allowance.



As this is a single layer bag, I want to keep the raw edges tidy. So I pinked the edges with my pinking shears and then pressed the seams open.



Making the flap – cut 2 flap pieces from your chosen fabric using the flap pattern. If you had saved the U shaped pieces left over from when you cut your body pieces earlier, you will find the flap pattern fits in there very nicely.

Place them right sides facing, match the edges together and pin in place.



Sew using a 3/8 (three eighth) inch (1 cm) seam allowance leaving a 2 inch gap along the straight side for turning. Cut the corners off carefully and clip around the curve – ie make small snips in the fabric carefully where the curve is but do not cut through your stitching line.



Turn the flap right side out using the gap you left along the straight edge. Gently poke the corners out with a pencil and using something like a butter knife, gently poke around the curve. Press the flap, top-stitch around the curved edge (see below) and set aside.



Now to form the bottom of the bag. Fold the bottom of the bag so that the side seam sits 2 inches in from the edge like this. Make sure all the edges line up at the bottom. Pin in place and do the same for the other side.



Sew straight across the bottom – see photo below. I actually sewed across this seam twice for strength.



You now have a choice of how you want to finish this raw edge. You can either pink the edge or you can encase the seam in bias-binding.



When you turn your bag out the right way, the bottom of your bag will look like this.



Next you have to sew the handle ends together. Place the handle ends on each side right side together and stitch across. Pink the raw edges and press the seams open. You’ll now have one big opening for your bag and two loops for your handles.



Now comes the binding! You may have come across this tutorial before – but if you have not, have a look at Amy Carol aka Angry Chicken’s video tutorial.

I tend to sew my bias binding on without pinning it first. I learnt how to sew bias binding using this terrific video tutorial made by Angry Chicken. Go check out that video first if you haven’t seen it before. Then come back here for the end of my tutorial.

Turn your bag so the wrong side is facing out. You’ll need to cut 3 pieces of bias-binding – cut 2 pieces which are 25 inches long and 1 piece which is 42 inches long.

Take one of the shorter pieces. Open up your bias tape and fold down the end by about 1/4 (quarter) inch. Place it along the edge of one of the handle loops with the bias-binding edge right on top of the edge of your fabric. I started sewing my bias-binding right by the seam at the top of the handle. Start sewing at your fold.



Sew right the way around until you get to your starting point. Overlap your bias-binding on top of your starting point and stitch on further by about 1/2 (half) inch or 1 cm. Cut off any excess bias-binding.



Flip the bag right side out. Fold the bias-binding over the edge and stitch it down.



Repeat this process for the other handle loop and the long edge around the opening of the bag. Use the 42 inch piece of bias-binding for the opening of the bag. You should end up with this.



On one side of your bag, draw a chalk line 1.25 inch (approx 3 cm) from the bottom edge of your handle loop. Mark the middle the the bag along that line too. Along the middle of the bag, make a chalk mark 4.5 inches below your chalk line. See the blue chalk marks in the pic below.



Place your flap on the line so the middle of your flap lines up with the middle of your bag. Pin in place.



Sew your flap to the bag. I used two rows of stitching.



On the opposite side, make a chalk mark in the middle of your bag about 1 inch from the bottom edge of your handle loop.



Sew one of the male half of your poppers to this mark.



To provide a little added strength to this closure point, I cut a small circle of fabric and placed it behind the point where I was sewing the popper and sewed through both layers.



I sewed the female half of my popper to the underside of the flap.



I sewed the other male half of the popper to the mark which I made 4.5 inches below the joining line of the flap, again using a small circle of fabric as reinforcement. You can also see the decorative button I sewed to the top of the flap in this photo.



That’s it! You’re done! To fold your bag, first fold the handles down like this –



Then fold one side of the bag towards the middle like this ...



Then fold the other side of the bag into the middle like this ...



Fold this rectangle in half and roll the bag up towards the flap.



Press the popper close and you have your cute little pouch which will fold out into a shopping bag.



Thanks for staying with me to the end of this tutorial. I hope you find it helpful when sewing your own foldaway shopping bag. Let me know how you get on and do post photos of your foldaway shopping bags on the CraftyAdy Flickr group. Email me or leave a message if any part is not clear.

Happy sewing!

The perfect shoes

The difference between the boy and the girl is that one could not care less about what he wears as long as he is adequately covered ... so, very short trousers don’t matter, holes in tshirts or shorts are irrelevant and it matters not if those trousers do not ‘go’ with that tshirt. He has never declared an item of clothing ‘perfect’. Everything is simply ‘Ok’.

On the other hand, the girl knows exactly what she likes and what she wants. Her wants are vocally declared as needs.

“I need a biscuit”

“I need sweets”

“I need to wear my blue dress”.

I think she feels that the word ‘need’ emphasises her desires more accurately than the word ‘want’.

We had popped out to the shops to buy Dinoboy a pair of cheap and cheerful trainers (depending on where you’re from, you might know them as running shoes or sneakers or joggers or sports shoes) for outdoor sports sessions at school. As I was watching him try them on, I heard Missy Moo loudly declare “I NEED those Perfect Dora shoes!” She’s never used the word ‘perfect’ to describe anything before this.

She had found some Dora trainers. And apparently, they are “Perfect”. I tried to convince her that she really did not need a pair of shoes as she had serviceable shoes already.

“But I do, Mummy! They’re perfect!”

She spent the next 2 minutes gushing about the perfectness of these shoes to the amusement of the staff at the shop. So we try them on and she declares “They are PERFECT!” Mr Crafty Ady walks into the shop and she’s yelling “ Daddy – look at my PERFECT Dora shoes!”

I relent and we purchase them. She wears them proudly, declaring to every one “Look at my perfect Dora shoes!”



We get home and she refuses to take them off. She wears them all through the day and ever so often she declares “I love my Perfect shoes.” And if any of us asks “How are your shoes?” She would reply “Just perfect!”



Mr Crafty Ady thinks it’s a girl thing. He thinks it is the shape of things to come. What do you think?

My Creative Space

I’m still working on my tutorial for my fold-away shopping bag.

The prototype was roadtested at the weekend and coped very well indeed. I made a 2nd one and am currently working on a third – primarily to test out different closure methods. What I also have in my space are three more foldaway shopping bags ready cut and waiting. Look at these gorgeous Amy Butler decorator-weight fabrics .... aren’t they drool-tastic?!



These are from Amy’s August Fields collection of Home Decor weight fabric. They are 100% cotton sateen and are sturdy yet soft. I’m really looking forward to making these.

Have a look at other creative spaces here at Kootoyoo’s blog.

Wishing you a wonderful and creative Thursday.

Wordless Wednesday - a distant memory